Inflatable Rubber Marine Salvage Airbags for Refloatation, Sunken Ships Rescue, Lifting Airbag with Capacity of 25 Tons

Inflatable Rubber Marine Salvage Airbags for Refloatation, Sunken Ships Rescue, Lifting Airbag with capacity of 25 tons

Marine Airbags, which can be used for supporting docks and other floating structures.
Airbags are also excellent for pip-laying and other underwater construction projects to supply buoyancy.

But the main application of rubber airbags is in shipwreck salvage, floating bridge
And dock construction rescue and remove of wrecked ships.

Salvage Airbags are very small in size while deflated with light weight. Thus, they can be esaily transported and deployed. They can be used vertically to bright the sunken ship out of deep water. When the boat is suspended near the surface they can be slung under the boat with one end on each side to raise the boat high enough out of the water to pump out. In shallow water, two bags can be slung together, one on each side of the boat, like pontoons. They can also be used as rollers for moving beached boats back into the water, just like Ship Launching Airbags.

Advantages of marine salvage airbags:

1. Special Synthetic-tire-cord layer material

2. Hight-Pressure Design

3. Holistic Screw Type Enlacing Salvage Airbags

4. Equipped with whole accessories

Here below is the salvage tube buoyancy list

Accessories of marine airbags.

Evergreen marine airbags is equipped with nylon straps and shackles with 6: 1 safety factor.

Testing and Quality of Ship Launching Airbags:

Evergreen Management System is certified ISO 9001-2000 and follows each order during manufacturing procedures. Evergreen guarantees high standards and performances of all products. Customer requirements are strictly followed during all production phases. Evergreen relevant departments assure a procurement control on the raw and basic materials. All the material of Evergreen Airbags are selected in accordance with CB/T 3795.

Evergreen are very focused on the quality. We invest advanced inspection equipment. 100% airbags should be tested and inspected as per the requirement of CB/T 3795-2009. Non conformed products are immediately rejected by Quality Control. The widely usage have been tested under rough condition. Our many satisfied customers are out best reference.

Evergreen welcomes inspection by its customer's quality assurance departments and to their appointed agencies as CCS, Lloyd's, DNV, or ABS.