Marine Yokohama Pneumatic Rubber Fender, Ship, Boat, Vessel with ABS Lr CCS Certificate Pneumatic Fender Manufacturers

NANHAI PNEUMATIC RUBBER FENDER
 

Pneumatic Fenders Leading Anti-collision Device for Marine Application  also called pneumatic fender, rubber fender, yokohama fender, made by rubber & multi layer of rubber-dipped tyre fabric, is a leading anti-collision device for marine application in the world today.

Pneumatic Rubber Fender Leading Anti-collision Device for Marine Application  have become an ideal ship protection medium against collision among ship-to-ship (STS), ship to quay (STQ) and ship-to-berthing (STB), they are widely used for large tankers, vessels, docks, harbor wharfs and ocean platforms.

NANHAI FLOATING PNEUMATIC SHIP RUBBER FENDER STRUCTURE
 

Floating marine ship rubber fender is made of synthetic-cord-reinforced rubber sheet with compressed air inside to enable it to float on the water and work as a shock absorber between two ships, or between ships and berthing structures when they come alongside each other on the water.

The fender body is constructed of an inner rubber layer, reinforced cord layers and an outer rubber layer. All of these layers are vulcanized together.

The outer skin rubber compound is designed and manufactured to be able to withstand both strenuous use including abrasion during adverse weather conditions whilst protecting the cord layers and inner rubber.

The synthetic tyre cord layers are arranged and designed to distribute load and stress evenly, which maintains the internal air pressure of the fender.

The inner rubber compound is designed to be completely airtight, utilising a compound equivalent tothat an inner tube of a car tyre.

CLASSIFICATION OF PNEUMATIC SHIP RUBBER FENDER
 

Fender types:

1.Net-type fenders: fenders which are covered by a tire chain net, each end shall be linked together with one to two ring(s).

2.Sling-type fender: fenders which are designed to be used without a protection net.

Initial internal pressure:

1.Pneumatic fender 50 (initial internal pressure 50 KPa)

2.Pneumatic fender 80 (initial internal pressure 80 KPa)



PNEUMATIC MARINE SHIP RUBBER FENDER APPLICATION

Floating pneumatic marine ship rubber fender could be used as a protective medium for ship-to-ship operation(STS), ship-to-quay(STQ) and ship-to-berthing(STB). And suit for various vessels, like:

1. Tankers, Gas Carriers and Bulk Cargo Ships;

2. Fast ferries and aluminum hulled vessels;

3. Temporary of permanent installations;

4. Rapid response and emergency fendering;

5. As stand-off fenders to realign ships with shore facilities.

PERFORMANCE CALCULATION OF NANHAI - PNEUMATIC FENDER

The volume of the fender at free state is Vo, and the interior pressure (i.e. original pressure) is Po; when the fender is compressed by dx, its volume is Vx, its interior pressure Px, and its contact Sx.
Its counterforce, Rx, can be calculated as follows: Rx=Px:Sx
At this time, its energy absorption, GEA, calculated as follows: GEA=JxoRxdx
The curve of interior pressure Vs deformation relationship during fender compression test is listed in Table Size, performance and weight of pneumatic rubber fender

MAJOR STRENGTHS OF NANHAI-PNEUMATIC FENDER

NanHai-Pneumatic Fender is strictly produced according to ISO17357-1:2014standard and PIANC guideline in NanHai
 

NANHAI-PNEUMATIC FENDER SPECIFICATION

FOR NANHAI BRAND


NanHai Brand established since 2003, Own advanced brand effect in the world. we have always focussed on our valued customers and committed to airbags and pneumatic fenders manufacture and R&D. As time moves on, we are continually engrossed in the challenges of this ever changing world.
Our commitment to you, our customers, is that we endeavour to provide the best value solutions to your technology problems.
During company development history have very famous project case and abundant experience. 
We look forward to meeting your challenges of the future as a significant supporter of your business. 

FOR NANHAI QUALIFICATION



FAQ

1."I have ships but don't know how to choose the size of marine fenders, can you help me."
Answer: Don't worry. We have more than 20 years' experience. Pls tell me information of your ship, we can suggest suitable size for you.

2."I want to try your marine fenders, but I never use it and don't know how to use, can you help me?"
Answer: Don't worry. We will send instruction book together with marine fenders.

3."What's your MOQ?"
Answer: Our MOQ is 1PC.

4."How about the lifespan of your marine fenders?"
Answer: Designed lifespan of our marine fender is 6 to 12 years

5."What's your warranty period?"
Answer: Our warranty period is 2 years. we will responsible for the repairment or replace the new ones for you if it proved to be our quality problem.

6."What kind of certificate can you provide ?"
Answer: CCS, SGS, BV, ISO17357 etc. certificate is available